Controlador da Umidade da Temperatura de Hygrostat do Termostato Digital do Diodo Emissor de Luz de Dtc3200 ac 110220v para o Sensor Sht20 da Incubadora do Aquário

Opção de Compra e tempo de entrega

AvisoPara mais informações sobre esse produto com preço promocionais e forma de entrega, click no botão abaixo e visite o portal da loja

DTC3200

Specification:
Product Name: Temperature and Humidity Controller
Product model: DTC3200
Power supply voltage: AC 110 -230V
Power supply frequency: 50 / 60Hz
Sensor Probe Length: 1m
Sensor Probe Type: SHT20
Temperature measurement range: -20 -60
Humidity measurement range: 0% -100% RH
Temperature measurement accuracy: 0.3
Humidity measurement accuracy: 3%
Output control: Relay output
Output power: MAX 10A
Size: 93*56*34mm

Setting:
Setting method: start value  stop value (the program automatically
determines the working mode to be cooling / dehumidifying mode)
Heating / cooling mode setting
Setting method: setting (starting temperature): long press the
button, the starting temperature flashes, and the starting temperature
value is set by the button
Setting (stop temperature): long press the button to stop the
temperature flashing, set the stop temperature value by button

Heating use case: control the water heater, heating to 65 to stop, the temperature drops to 50 to start heating again
The first step: heating working mode, start temperature  stop temperature
Step 2: Press and hold the button, the starting temperature flashes,
and set the starting temperature to 30 via the button
Step 3: Press and hold the button to stop the temperature flashing,
and set the stop temperature to 26 ° C with the button. The setting
is complete!

Humidification / dehumidification mode settings:
Setting (Start Humidity): Long press the key, the start humidity
value flashes, and set the start humidity value with the key. Set
[Stop Humidity]: Long press the key, stop the humidity value flashing,
and set the stop humidity with the key value.

Examples of humidification: Fresh supermarket humidification, control
humidifier 50% RH to start humidification, humidification to 80% RH to
stop humidification.

Setup steps:
Step 1: Press and hold the key for 3 seconds to start the humidity
value flashing, and set the start humidity value to 50% RH.
Step 2: Press and hold the key for 3 seconds to stop the humidity
value flashing, set the value to 80% RH, the setting is completed, press
the button for 5 seconds without operation, and automatically return to
the normal display state

Dehumidification example: workshop control exhaust dehumidification
system, humidity 70% RH starts dehumidification, humidity 40% RH stops
dehumidification

Setup steps:
Step 1: Press and hold the key for 3 seconds to start the humidity
value flashing, and set the start humidity value to 40% RH.
Step 2: Press and hold the key for 3 seconds to stop the humidity
value from flashing, set the value to 70% RH, the setting is completed,
press the button for 5 seconds without operation, and automatically
return to the normal display state

Temperature correction:
Simultaneously press the key for 3 seconds to start the temperature
digit flashing, and use the key to set the start temperature
correction value; after the setting is completed, press the button for 5
seconds without operation, and automatically return to the normal
display state.

Humidity correction:
Simultaneously press the key for 3 seconds to start the humidity
digit flashing, and set the humidity correction value by the key;
after the setting is completed, press the button for 5 seconds without
operation, and it will automatically return to the normal display state.

Package Included:
1 * DTC3200 Thermometer Hygrometer
1 * SHT20 Sensor Probe
1 * Manual

Note:
If the temperature and humidity display LLL, please confirm whether the
wiring of the SHT20 digital temperature and humidity sensor is correct,
whether there is poor contact, you can try to reconnect the wiring.