Controlador Solar Mppt5030-duo Bateria Dupla de Carregamento Mppt Controlador Solar com Tela de Exibição Bluetooth

Description:

1. Increase the charging current. Compared with the traditional PWM controller, the MPPT charging efficiency can be increased by 10-30%. (Controller conversion efficiency>95%)

2. Five types of batteries can be selected through the DIP switch. GEL battery, lead-acid battery, AGM, lithium iron phosphate battery and ternary lithium battery.

3. Double battery charging. Two sets of batteries can be connected at the same time, and the batteries can be charged according to the priority set by the user, which can maximize the use of the energy of the solar panel.

4. With Bluetooth function, it can be connected to an external Bluetooth module, and the controller parameters can be displayed through the mobile phone APP (need to purchase a separate Bluetooth adapter), the effective distance of the Bluetooth.

5. Two sets of batteries of different types and voltages (12V or 24V) are allowed to be connected at the same time. The controller will judge the current battery type and battery level before charging, and adopt different charging strategies.

6. Fully automatic unattended charging. With overload, overheating, reverse current protection (when it is cloudy or there is no sunlight at night, it can prevent the battery from backflowing.

7. Overcharge protection. When the battery is fully charged, the charging current will decrease, and when the battery is empty, the battery will be charged immediately.

8. Automatic temperature compensation function. The two batteries use independent temperature sensors to ensure that the battery is in a low temperature or high temperature environment, and the best charging is used to extend the service life of the battery. It is strongly recommended that the battery and the controller are not installed in the place of the heat source, so as not to cause the controller misoperation.

9. Warm Remarks: Lithium battery has no temperature compensation, no need to connect temperature sensor. Increase the charging current, compared with the traditional PWM controller, MPPT charging efficiency can be increased by 10-30%. (Controller conversion efficiency>95%)

Specifications (Solar Controller)

Model: MPPT5030-DUO
PV maximum power: 12V: 390W, 24V: 780W
PV maximum voltage: 50V
Maximum charger current: 30?
Battery voltage: 12V/24V auto recognition
Battery type: GEL, lead-acid, AGM. LiFePO4, lithium-ion (NCM)
Charging method: MPPT
Optional accessories: monitor, temperature sensor, Bluetooth dongle
IP level: IP20
Weight/Dimension: about 0.78kg/ about 147x155x43mm/5.79×6.10×1.69inch

Safety regulations and scope of use:

1. Only GEL batteries, lead-acid liquid batteries, AGM batteries, lithium iron phosphate and ternary lithium batteries that meet the rated voltage can be charged (lithium batteries must be equipped with BMS) batteries
2. The solar panel power use solar panels within the maximum rated power of the controller
3. Refer to the recommended value of the factory for the wire diameter of the connecting cable. If the cable is too small, it will cause the cable to overheat and energy loss
4. Install a rated fuse near the battery end to protect the cable between the battery and the solar panel
5. Please install in a well-ventilated room to prevent rain, humidity, dust, corrosive battery gas and no condensation in the environment.
6. Temperature sensor, Bluetooth module, and display are optional accessories, please order separately if necessary.
7. Keep the controller and battery away from children.

Features:

1. Bluetooth Features:
1. This Bluetooth module is an accessory of the solar controller, when the user needs to display the controller through the APP. 2. When working parameters, you need to purchase this Bluetooth module separately, and the controller can handle the work through this Bluetooth module. 3. The specifications are sent to the mobile phone and displayed through the dedicated APP.

2. Connection Method:1. Insert the connection line of the Bluetooth module into the dedicated Bluetooth interface of the solar controller with Bluetooth communication function, and then
just fix the module in any position.

3. Warm Note: The Bluetooth module cannot be installed in a metal shielded place, and the distance from the mobile phone is less than 10 meters.

Note:

1. Mobile Phone Operating System Requirements: Install version 5.0 or above, for IOS version, for iphone4.0 or above.
2. The Bluetooth adapter can not be installed in a metal shielded environment.
3. Please make sure that the Bluetooth function and location information of the mobile phone are turned on.
4. The APP must be run before the device is connected, the APP will automatically search for the device, click the device name to connect to Bluetooth.
5. The distance between the Bluetooth adapter and the mobile phone must be less than 106. Onlymobile phone is allowed to connect to Bluetooth at the same time, and the mobile phone needs to be connected, and the connected mobile phone must be exited from the APP.
7. Some mobile phones may need to search repeatedly to find the device.
8. Due to the lighting effects and shooting angles, there is color difference in the product, please understand.
9. Due to manual measurement, there is a tolerance in the product size.

Specifications (Bluetooth Module)

Model: BT10
Bluetooth version: Bluetooth 4.2
Working voltage: 5V (provided by the controller)
Standby power consumption: <500uA
Length of connection line: 3 meters
Bluetooth distance: <10 meters
Interface type: XH2.54-4P
Size: about 67*35*20mm/2.64*1.38*0.79inch
APP name: for ChargerConnect

Specifications (Display Screen)

Display with Bluetooth and 5m sensor cable:
Work voltage: 12V or 24 V
Voltage range: 8V-32V
Work current: 3-30 mAh(According to the backlight brightness)
Capacity range: 20-999 Wp
LCD display:
Display area: about 49 x28mm/1.93x 1.10inch
Backlight: LED
Size: about 110×110×40mm/4.33×4.33×1.57inch
Weight: about 75g

Function:

1. LCD display, display the charging current, battery voltage, charge power, PV power, charge capacity.
2. Charge AH values can be return to zero anytime.
3. Adjustable backlight brightness.
4. The installation is simple and convenient.

Packing List:

1*Solar Controller

or

1*Sensing Line 5m
1*Bluetooth Display Screen

or

1*Bluetooth Module

or
1 Set

Note:

1. Due to the lighting effects and shooting angles, there is color difference in the product, please understand.
2. Due to manual measurement, there is a tolerance in the product size.