Suprimentos e Equipamentos Elétricos

Vídeo de Demonstração do Produto

Opção de Compra e tempo de entrega

Aviso Para mais informações sobre esse produto com preço promocionais e forma de entrega, click no botão abaixo e visite o portal da loja

Ficha técnica do produto

Características	Especificações
Fonte de Energia	CA
Cutomizado	SIM
Utilização	Propósito Geral
Número do Modelo	Tsr-40aa
Carga de Contato	Baixo Consumo de Energia
Característica de Proteção	Selado
Teoria	Relé de Estado Sólido
Nome da Marca	Earueletric
Origem	CN (origem)
Control Voltage	70-280vac
Rating	10A 480vac
Control Type	AC Control AC
Load Current	10A 25A 40A 60A 80A 100a 120a 200a
Size	150.8mm75.5mm37.5mm
NET Weight	237.5g
Module Number 1	Ssr-10aa/ssr-25aa/ssr-40aa/ssr-60aa
Module Number 2	Ssr-80aa/ssr-100aa/ssr-200aa

Step 1: Choose a correct control Mode
AA– AC Control AC
DA– DC Control AC

Step 2: Choose a correct type
Current of Equipment/Ratio = Current of SSR
PS: The Ratio depend on the kind of your loading equipment.
Resistive load :70%, Inductive load:20%,Capacitive load:10%.

Step 3: Choose a suitable heat sink
During the useage of SSR, it will give out a lot of heat, so in order to extend the life of your SSR, please install a heat sink , also if the current is over 60A,the cooling fan also required.
PS: Our Heat Sink include 2 screws (for install heat sink) and a pack of thermal compound (is applied to the bottom of the SSR)

Notice:
The inside of the solid-state relay is a semiconductor. A semiconductor switch is a non-physical contact switch. if use a multimeter diode or resistor to test ,it always show a high-impedance state, (multimeter light red).
According to the conventional detection methods of solid state relays: a load is required to test the switching state. Using an incandescent lamp as a dummy load is an obvious way to test continuity.