Worm Alinhou 2.6n. M370oz-in Nema23 Fechou o Motor de Passo 4a do Laço e o Motor Deslizante do Motorista Hse57 com Codificador o
R$ 480,73
DÚVIDAS?
Envie um email para:
O worm alinhou 2.6n. m(370oz-in) nema23 fechou
Opção de Compra e tempo de entrega
Informações Técnicas do Produto
| Características | Especificações |
|---|---|
| Nome da Marca | Kimbrough |
| Certificado | CE |
| Origem | CN (origem) |
| Corrente Contínua(a) | 4A |
| Número do Modelo | 57hsewg85+hse57 |
| Torque | 2.6n.m(370oz-in) |
| Motor Holding Torque | 2.6n.m(370oz-in) |
| Encoder Line Number | 1000ppr |
Worm geared 2.6N.m(370oz-in) Nema23 Closed Loop Stepper Motor 4A and driver HSE57 Stepper Motor with Encoder
This item includes :
1 PC Worm geared NEMA23 closed loop stepper motor 57HSEWG85
1 PC closed loop stepper motor driver HSE57
2 meter cable
1. Closed loop stepper motor
General specifications
|
Step Angle |
1.8 degree |
|
Step Angle Accuracy |
5% |
|
Encoder Line Number |
1000ppr |
|
Temperature Rise |
MAX 80°C |
|
Use Environment |
Temperature: -20°C- +50°C; Humidity: 85% MAX |
|
Insulation Class |
B |
|
Insulation Resistance |
MIN 100MO, 500VDC |
|
Withstand Voltage |
500 VAC, 1 min |
|
Shaft Radial Deviation |
0.02mm MAX (load 5N) |
|
Shaft Axial Deviation |
0.08mm MAX (load 10N) |
|
Radial Maximum Load |
75N(At 10mm from the flange) |
|
Axial Maximum Load |
Motor weight |
Technical data :
|
Model |
Length (L:mm) |
Holding Torque (N.m) |
Rated Current (A) |
Resistance /Phase (O) |
Inductance /Phase (mH) |
Rotor Inertia (g.cm2) |
Weight (kg) |
Gear Ratio |
Matched Driver |
|
57HSEWG56 |
172 |
1.3 |
4 |
0.3 |
1.13 |
300 |
2.3 |
5:1 7.5:1 10:1 15:1 20:1 25:1 30:1 40:1 50:1 60:1 80:1 |
HSE57 |
|
57HSEWG76 |
192 |
2.3 |
4 |
0.42 |
1.55 |
480 |
2.6 |
||
|
57HSEWG85 |
201 |
2.6 |
4 |
0.38 |
1.9 |
530 |
2.7 |
||
|
57HSEWG102 |
218 |
3 |
4 |
0.5 |
2.4 |
640 |
2.9 |
||
|
57HSEWG112 |
228 |
3.5 |
4 |
0.65 |
3.2 |
700 |
3.2 |
Note: Other worm gear ratio is acceptable, it can be customized according to customers’ requirements.
Dimension: unit=mm
Encoder connection
|
PIN |
2 |
3 |
1 |
13 |
11 |
12 |
|
Color |
RED |
WHITE |
BLACK |
BLUE |
YELLOW |
GREEN |
|
Defination |
VCC |
GND |
EA+ |
EA- |
EB+ |
EB- |
Motor connection
Precautions :
1. When installing/removing parts to the end of the motor shaft, do not hit the shaft hard to prevent the encoder at the other end of the shaft from being knocked bad.
2. Striving to keep the shaft seat from vibration to prevent bearing from being damaged.
2. Closed loop stepper motor driver
HSE57
Features
1. 32 bit DSP control technology
2. The current can be set arbitrarily ( 0-6.0A)
3. Adaptable to drive 42, 57 and 60 series closed-loop stepper motors
4. Pulse response frequency amounts to 200KHz
5. Standard 16 channels microsteps selection (200~51200 Pulse/R)
6. Electronic gear mode (any microstep value)
7. Protection against overcurrent, overheating, overvoltage and tracking error deviation
8. It can connect +5-+24V, no extra resistor is needed when it is over +5V
Electrical Index
|
Parameter |
Minimum |
Typical |
Maximum |
Unit |
|
Continuous output current |
0 |
– |
6.0 |
A |
|
Input voltage (DC) |
+24 |
– |
+80 |
Vdc |
|
Logic input current |
7 |
10 |
20 |
mA |
|
Pulse frequency |
0 |
– |
200 |
kHz |
|
Insulation resistance |
500 |
MO |
||
|
Encoder current |
50 |
mA |
Use Environment and parameters
|
Cooling mode |
The heat sink is naturally cooled (if the environmental temperature is too high, please use an external cooling fan to dissipate heat) |
|
|
Use environment |
Use occasion |
No dust, oil stain and corrosive gas |
|
Temperature |
-1050 |
|
|
Humidity |
40-90%RH |
|
|
Vibration |
5.9m/s2 Max |
|
|
Storage temperature |
-20+80 |
|
|
Weight |
300g |
|
Dimension Unit:mm
1. o Motor de Passo 4a do Laço – Encoder Line Number : 1000ppr
Note:
Keep the driver cool
(1)The reliable operating temperature of the driver is usually within 60 °C, and the motor operating temperature is within 80 °C;
(2)When installing the driver, please install it on the upright side, keep away from the heat source. If necessary, please install a cooling fan on the electrical cabinet.
Avaliações de Usuários
Seja o primeiro a avaliar “Worm Alinhou 2.6n. M370oz-in Nema23 Fechou o Motor de Passo 4a do Laço e o Motor Deslizante do Motorista Hse57 com Codificador o”
Produtos relacionados
R$ 480,73
Não existe nenhuma avaliação ainda.